Termite Inspection & Treatment Bankstown & Sydney South West
Protect your biggest asset with advanced termite detection and proven treatment. Thermal imaging inspections, chemical soil barriers, and baiting systems — all fully compliant with Australian Standard AS 3660.
Quick Facts
Inspection Time
1–2 hours full property
Written Report
Issued same day
Barrier Protection
Up to 8 years coverage
AS 3660 Compliant
Australian Standard certified
Pre-Purchase
Inspections for buyers & sellers
Termites: Australia's Most Destructive Pest
Termites cause more property damage in Australia than fire, floods, and storms combined — and not one dollar of that damage is covered by standard home insurance. In Sydney South West, the combination of warm soil conditions, established landscaping, and older timber-framed housing stock makes suburbs like Bankstown, Liverpool, Revesby, and Chester Hill among the highest-risk areas in the region.
The most dangerous aspect of termite infestation is that it is almost entirely invisible until significant structural damage has already occurred. Termites work from the inside out — consuming floor framing, wall studs, and roof trusses while leaving a thin surface layer intact to avoid detection. By the time you notice hollow-sounding timber or doors that won't close properly, tens of thousands of dollars in damage may already have been done.
Australian Standard AS 3660 recommends annual inspections for all properties in high-risk zones — which includes virtually all of Sydney South West. Early detection is the single most effective way to prevent costly structural repairs.
- Termites can destroy a home's structural integrity within 3 years
- Standard home insurance does NOT cover termite damage
- Damage is hidden inside walls, floors and roof framing
- A single colony can contain up to 1 million individual termites
- Western Sydney clay soils are ideal for subterranean termite activity
- Annual inspections are the only reliable early-detection method
The Real Cost of Termites
Average termite repair costs in Sydney range from $10,000 for minor structural repairs to over $100,000 for severe infestations requiring major structural work. A professional inspection costs a fraction of that — and can identify activity before any significant damage occurs.
Warning Signs to Look For
Flying termites (alates) near windows or light sources during warm evenings — a sign that a mature colony is expanding nearby.
Mud leads or shelter tubes on walls, stumps, fence posts, or in the subfloor — the travel tubes termites build to protect themselves from air and light.
Hollow-sounding or blistered timber — tap structural timbers, skirting boards, and door frames. A hollow sound indicates termites have been feeding inside.
Tight-fitting doors or sagging floors — caused by moisture from termite activity warping nearby timber structures.
Never DIY Termite Treatment
Retail termite products can scatter a colony deeper into your structure, making professional treatment more difficult and costly. Always call a licensed technician before attempting any treatment. Disturbing an active termite infestation without professional guidance almost always makes the situation worse.
Advanced Termite Detection Methods
We use a combination of detection technologies to find termite activity that visual inspection alone would miss — without drilling, cutting or damaging your property.
Thermal Imaging
Professional-grade thermal cameras detect the heat and moisture signatures that active termite workings produce inside walls, floors, and ceilings — completely non-invasive.
Moisture Detection
Termites need moisture to survive. We use calibrated moisture meters to identify elevated moisture levels in timber — a reliable early indicator of concealed termite activity.
Visual Inspection
A thorough hands-on inspection of all accessible areas — subfloor, roof void, internal rooms, exterior perimeter, fences, garden structures, and any timber-to-ground contact points.
Timber Sounding
Systematic tapping of structural timbers, skirting boards, and door frames to identify the hollow sound caused by termites feeding inside — a low-tech but highly reliable detection tool.
Our Termite Treatment Methods
We recommend the most appropriate solution based on your property type, termite species identified, severity of activity, and budget.
Chemical Soil Barrier
A continuous liquid termiticide is injected into the soil around the entire building perimeter, creating an undetectable chemical zone that kills termites on contact. The most widely used and proven termite protection method in Australia.
In-Ground Baiting System
Monitoring stations are installed around the property perimeter. Once termite activity is detected, bait cartridges are introduced. Termites carry the bait back to the colony, eliminating the queen and the entire nest over 6–12 weeks.
Direct Colony Treatment
Where an active colony or workings are directly accessible — in a subfloor void, wall cavity, or tree stump — we apply a non-repellent termiticide dust or foam directly to the workings for immediate and targeted colony disruption.
From Inspection to Protection
A clear, professional process from your first call to a fully protected property.
Book an Inspection
Call or enquire online. We'll arrange a convenient time and advise on what to expect. Same-day inspections available in most suburbs.
Full Property Inspection
Comprehensive inspection using thermal imaging, moisture detection, and physical assessment of all accessible interior and exterior areas including subfloor and roof void.
Written Report & Quote
A detailed written inspection report is provided same day — with findings, risk assessment, diagrams, and a clear treatment recommendation with upfront pricing.
Treatment & Protection
We install the recommended treatment — chemical barrier, baiting system, or direct colony treatment — and provide annual monitoring to keep your protection active.
Expert Termite Control You Can Trust
We carry out every inspection and treatment to the highest standard — fully compliant with Australian Standard AS 3660 for termite management.
Thermal Imaging Technology
We detect termite activity inside walls and floors without drilling or causing any damage — using the same professional thermal cameras used by the country's leading pest companies.
AS 3660 Compliant
All inspections and treatments are carried out in full compliance with Australian Standard AS 3660 — the recognised standard for termite management in Australian buildings.
Detailed Written Report
Every inspection includes a comprehensive written report with findings, diagrams, risk assessment, photos, and clear treatment recommendations — essential for property buyers and sellers.
Pre-Purchase Inspections
Buying a property in Sydney South West? Our pre-purchase termite and pest inspection gives you the complete picture before you sign — and could save you tens of thousands.
Licensed & Experienced
Fully licensed by NSW Fair Trading with years of experience treating termite infestations across Bankstown, Liverpool, Revesby, Chester Hill and surrounding suburbs.
Annual Monitoring Program
We recommend and provide annual re-inspections to ensure your treatment barrier remains effective and any new termite activity is identified and treated before damage occurs.
Do You Have Termites? Signs to Check Now
If you notice any of these warning signs on your property, call us immediately for an inspection. Early detection is critical.
Flying Termites (Alates)
Winged termites swarming near windows or lights during warm evenings — a colony is expanding nearby. Act immediately.
Mud Leads or Shelter Tubes
Brown, muddy tubes running up walls, stumps, or in subfloor areas — the travel tubes termites build for protection.
Hollow-Sounding Timber
Tap skirting boards, door frames, and structural timbers. A hollow or papery sound indicates termites have been feeding inside.
Tight Doors or Sagging Floors
Moisture from termite activity warps timber. Suddenly stiff doors, warped floors, or buckled skirting are warning signs.
Blistered or Bubbled Paint
Paint that looks blistered or bubbled on timber surfaces — often mistaken for water damage — can indicate termite workings just beneath the surface.
No Visible Signs
The most common situation. Most active termite infestations show no visible signs at all. Annual professional inspections are the only reliable early-detection method.
Termite Treatment — Frequently Asked Questions
Everything you need to know about termite inspections and treatment across Bankstown and Sydney South West.
Termite Treatment Across Sydney South West
We provide termite inspections and treatment across all of these suburbs. Same-day inspections available in most areas when you call before noon.
Protect Your Home from Termite Damage
Don't wait until damage is visible. Call now for a same-day termite inspection across Sydney South West.